Main Board Specifications
MB General Specifications: |
|
Processor |
ARM processor Cortex-M7 core with floating point unit. |
External Memory |
1MB RAM |
RTC |
Real time clock is configured to report events with accurate time in milliseconds. |
Time synchronization |
Auto clock synchronization to time server UTC using NTP protocol. |
Watch Dog Monitor |
External watch dog monitoring circuits. |
VMU Specifications: |
|
Number of channels |
7 Simultaneous Sampling (3 Before UPS, 3 After UPS, 1 For Neutral to Earth Voltage). |
Sampling Rate |
8 KSPS per channel |
ADC Resolution |
24-Bits |
Input Voltage Measurement Range |
0-480 VRMS ± 15% (VRMS max 550 VAC) |
Input Voltage Measurement Resolution |
.1 VRMS |
Input Voltage Measurement Accuracy |
± 2% Max at full scale |
Input Voltage Frequency |
40-70 Hz |
Neutral to Earth Voltage Measurement Range |
0-10 VRMS Max. |
Voltage Imbalance Percentage |
0-100 % |
WFAU Specifications: Power Events Detection According to IEEE classifications Of Power Quality (IEEE Std 1159-2009). |
|
Types of events detected |
Voltage Sags, Voltages Swells, Interruption, Under voltage, Over Voltage and Voltage Transients. |
Other types of events |
Status of Main input Power, UPS Status, Phase sequence Detection* |
Event Trigger |
Voltage deviation of ½ cycle RMS voltage (≤ 90%) or ≥ (110%) of set nominal. |
Event Details Saving |
Start and End of event is captured and reported accurately with 4 Cycles before and after. |
Periodic RMS Data Saving |
Maximum, Minimum and average voltage recorded for each 2 minutes period. |
GRMU Specifications: |
|
RE Measurement Range |
.05 -200 Ω Max |
RE Measurement Resolution |
0.1 Ω |
RE Measurement Accuracy |
±3 % |
RE (Phase to earth) Test Condition |
Maximum Test Current @ 220 V is 22 A sinusoidal for 5 ms. |
Auxiliary Temperature Sensor Specifications: |
|
Number of Sensors |
3 |
Type of Sensor |
NTC |
Measurement Range |
0 - 80 °C |
Measurement Resolution |
0.1 °C |
Measurement Accuracy |
±0.5 °C |
Internal Power Supply Specifications: |
|
Internal Power Supply input Voltage source |
Powered from (L1-N) or (L1-L2) |
Input Voltage Range |
85 ~ 264 VAC |
Input Frequency |
47 ~ 440 Hz |
Output Voltage |
12 VDC |
Rated Power |
30 Watt |
Safety Standards |
UL60950-1, TUV EN60950-1 approved |
MTBF |
593.3 Khrs min. MIL-HDBK-217F (25℃ ) |
External input Power for system configuration |
9 VDC (configuration only) |
Battery Specifications: |
|
Manufacture |
Long (www.klb.com.tw) Model : WP10-6 |
Technology |
SLA |
Capacity |
10 AH |
Voltage |
6 VDC |
System Battery Backup time |
8 Hours |
Battery Full Charging Time |
20 Hours (1% to -99% ) |
Communication Specifications: |
|
RS485 |
Supported for internal modules (X) MB. |
Ethernet |
IEEE-802.3-2002-compliant (RJ45) To connect the MB to the internet. |
Network configuration |
Powering external router with router reset periodically |
Environmental & Mechanical Specifications: |
|
Indicators |
Three LEDs ( Running, Online, Alarm ) |
Enclosure |
IP22 (Indoor use only). |
Operating Temperature |
0-50 °C |
Storage Temperature |
0-70°C |
Relative Humidity |
0-95% RH |
Weight |
4.65 kg with battery |