This section provides steps to diagnose and resolve issues related to the  Motor Measure Unit (MMU).

♦ Checking MMU Status

  1. Ensure that all MMU current coils are properly connected
  2. Open the Inspector embedded web server
  3. Navigate to the MMU connection status page
  4. Verify the connection status:
    • The status should appear as “Connected”

♦ Troubleshooting Connection Issues
     If the MMU status shows “Disconnected” or “Error”, perform the following:

  • Check all current coil connections:
    • Ensure that each coil is properly installed and connected
  • If all coils are correctly connected and the issue persists:
    • Replace the MMU.

Created with the Personal Edition of HelpNDoc: Easily create HTML Help documents